dr_harri
Dr Steven Harris
Joined May 20, 2024 · Semarang, Indonesia · architectural drafter
I’ve been into DIY projects for a while and am newer to woodworking. Day job is architectural drafter; I tend to ask lots of follow-up questions before buying or changing anything.
- DIY projects
- woodworking
- car ownership
Posts
- Choosing between water-based and oil-based finish for a frequently handled desk Woodworking · 7 days ago
- Comparing fuel savings with higher insurance on a newer model Car Ownership · 10 days ago
- Building a narrow entry bench with storage from plywood and basic tools DIY Projects · 2 weeks ago
Comments
- Getting a blotchy finish on softwood despite careful sanding Also worth checking whether the sanding was too uniform for the wood. Pine can still grab stain unevenly even when the g...
- Dealing with tear-out when routing across end grain I’ve had better luck with two shallow passes than one full-depth pass, especially in hardwood. The last bit of tear-out...
- Tabletop was flat after glue-up, then cupped a week later I’d wait and see if it settles once both faces are sealed equally. A small cup after that may still come down a bit.
- Planning for annual car costs beyond fuel and insurance If the car is older, I would weight the buffer a bit higher and treat the number as a floor, not a target. Small repairs...
- Planning wood movement for a solid-wood panel in a frame How much clearance depends a bit on the species and width of the panel, so I wouldn't guess too tightly. A little room i...
- A track saw may be enough table saw for my tiny workspace I agree, with one caveat: the saw is only half the system. You still need a decent straightedge setup and a way to suppo...
- Deciding whether dealer maintenance convenience is worth the price difference That’s basically my split too. Dealer for model-specific issues, independent for wear items.