fabiana96 · Places

I’m usually the person with too many tabs open about woodworking or car ownership. I work as a home renovator and mostly use forums to learn from other people’s mistakes.

Posts

Comments

Choosing between water-based and oil-based finish for a frequently handled desk That was my experience too. The finish I hated least after two years was the one that let me sand a bad spot and recoat...

Getting a blotchy finish on softwood despite careful sanding Or skip the stain entirely and use a tinted finish if you just want even color. I’ve had better luck with that on cheap...

Dealing with tear-out when routing across end grain That makes sense. The corner is the part I keep sacrificing, so I may need to rethink the sequence instead of trying to...

Tabletop was flat after glue-up, then cupped a week later Also, one board being wetter than the others can absolutely show up later. I had that happen on a bench top and thought...

Figuring out why a newly painted wall shows roller marks only in side light It was a mid-sheen finish, not full gloss. I’m wondering if I need a different roller nap more than anything else.

Planning wood movement for a solid-wood panel in a frame Exactly. If the groove is so snug that the panel can't move at all, that's usually the problem, not the solution.

A track saw may be enough table saw for my tiny workspace I went that route and have not missed a table saw as much as I expected. The floor space matters more than I thought it...